Data Acquisition
Data Acquisition
The articles in this category contain information for data acquisition with Volateq's drone-based inspection system.
Checklists
Data acquisition checklist PV thermography – Step-by-step checklist covering preparation before flight day, required weather and plant conditions, drone setup, and data upload after the flight.
Data acquisition checklist PV Soiling – Additional preparation steps for soiling analysis: clean reference module selection, tracking strategy, and post-flight timeseries data requirements.
Flight Regulations
Guidelines for Checking Drone Flight Restrictions and controlled/restricted Airspace (CTA) – How to verify no-fly zones and restricted airspace before operating at a plant site, with links to regional authorities.
Compatible Drone Models
Overview of all drone models compatible with the VolaFly app, including DJI Mavic 3T, Matrice 4T, Matrice 350 RTK, M30T, DJI Dock 2, and legacy Mavic 2 Enterprise Advanced. Includes purchase links and notes on PV vs. CSP compatibility.
Drone Configuration Guides
Model-specific setup instructions for DJI Pilot and DJI Pilot 2:
DJI M2E Advanced
DJI M2E Dual
DJI Mavic 3T/3E and Matrice 30T
DJI Matrice 4T
DJI Matrice 350 RTK with H20T/H30T
VolaFly App
Download and installation – Setup instructions for Mavic 3T and DJI Smart Controller (Mavic 2).
Flight mission execution – How to run flight missions and upload data via VolaFly.
RTK and NTRIP setup – Configuration of RTK positioning for high-precision flights.
[LEGACY] Litchi App
Download and Installation – Alternative flight app setup.
Settings and flight mission execution – How to configure and execute missions in Litchi.
Campaign & Flight Route Setup
How to create a new analysis and flight campaign – Setting up campaigns in the Volateq WebApp.
How to create your own flight routes – Guide for experienced customers to build custom flight routes.
Camera Calibration
Procedure Drone Camera Calibration – Instructions for calibrating the drone's IR camera.