/
Add HCE Temperature Reference Measurements to the Web App

Add HCE Temperature Reference Measurements to the Web App

 

Recording temperature measurement data that is necessary for the evaluation of our HCE Temperature package. We have prepared a special area in the web app where you can do that.

First, ensure the "Absorber Tubes" option is checked and that the GPS feature is activated:

image-20250603-075218.png

 

Navigate to the "Observations" tab on the left-hand side of the screen in the web app and follow these steps:

image-20250603-074818.png

 

Click on the selected tube to reveal a window displaying the KKS/PCS of the tube. Within this window, choose the "Observations" option. A new window will appear, allowing you to enter the temperature measurement. Enter the reference measurement and click "Apply" to save the data. The recorded information is automatically timestamped with the current time and date.

 

image-20241021-150957.png

 

Make sure that the reference measurement is assigned to analysis. There must be a analysis defined with the same date or earlier, so that the reference measurement can be merged and cross checked with the drone data

 

image-20241021-151017.png

 

In case of a lost connection or accidental closure of the app, the entered values are automatically saved. Users can reopen the application, and the system will prompt to continue the measurement, ensuring no data is lost during interruptions.