...
- Make sure that all info requested in Checklist solar plant data PV has been sent to Volateq
- Volateq team informed you that the flight routes are ready for your site
- make sure your RTK service is active and connecting on your drone. For more info see: RTK and NTRIP setup
- We recommend using the VolaFly Drone App. Instructions on how to install it on your drone controller can be found here: https://volateq.atlassian.net/wiki/spaces/VKB/pages/3394207745 VolaFly App: Download and installation
- Check if you have a fast enough SD card. Recommended SD cards: SanDisk Extreme 128GB V30 microSDXC or SanDisk Extreme Pro 128GB V30 microSDXC
...
- Make sure the drone settings are put correctly depending on which app you use for flight execution:
- Description on how to launch your drone in the VolaFly Drone App: https://volateq.atlassian.net/wiki/spaces/VKB/pages/3393191938 Volafly App: Flight mission execution
- In case you fly with litchi, please configure these settings in DJI Pilot 2 PV: DJI Mavic 3T and M30T : Drone configuration and flight execution with DJI Pilot 2 or PV: DJI M2E Advanced: Drone configuration with DJI pilot app for
and then launch the drone like this: https://volateq.atlassian.net/wiki/spaces/VKB/pages/3115155470 - Avoid touching any controller wheel or button during the flight, you might change the video settings. As a result, this flight cannot be evaluated
- Only start the flight with a full drone battery
...