Skip to end of banner
Go to start of banner

DJI M2E Advanced: Drone Configuration with DJI Pilot app

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

The following settings are mandatory to successfully carry out Survey measurements in CSP plants and must also be considered before doing the camera calibration.

The DJI handbook for the M2E Advanced can be found here.

If you are using Litchi

to perform flights, you will need to make all adjustments as described here in the DJI Pilot app. Litchi cannot be used to set any parameters!

Memory Cards

Only new SD cards may be used (depending on the number of recordings, ~0.5years to 1 year max).

Older SD cards may cause errors in the IR videos and the corresponding flights might have to be redone.

Only use the memory cards mentioned here:

  • SanDisk Extreme 128GB V30 microSDXC

  • SanDisk Extreme Pro 128GB V30 microSDXC

Using a different memory card with produce erroneous videos and data evaluation by Volateq will not be possible.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.