Content Comparison

...

Volafly can be currently used with the following drones:

App download: https://app.volateq.de/download-volafly (make sure to select the correct file, see below)

...

3: Battery level of drone and remote controller are checked

4: check drone position, controller position and home point on the map

Apply Volateq settings

Volafly automatically applies all required drone settings for the flight. If that fails (e. g. due to a bad health condition of the drone) it is possible to apply them them manually by clicking “Apply Volateq Settings”. It is not possible to take off, if the drone settings cannot be applied.

Selecting the Flight Route

On the left, select the flight route (1) corresponding the time slot on your shedule schedule (route names are the same).

...

Once you have selected the flight route you want to execute by clicking on it, it will appear on the screen. By collapsing the mission details, the start button will become visible. Simply click the start button, and the drone will take off and follow the pre-programmed route.

1: clicking the start button in the lower left triggers the drone to lift off and execute the flight route.

...

Warnings are issued if:

• the flight route has been created for a different drone model

• the distance between take of point and first waypoint is too large (flight route time)

• the battery is below 85%

• there is not enough storage capacity available

In all other cases, clicking the start button in the lower left triggers the drone to lift off and execute the flight route.

Image Removed

Image Removed

• greater than 50m

• the starting time is too early or too late for the selected flight route

• the health status of your drone has serious warnings

The flight cannot be executed if:

• the drone battery is below 60%

• the drone has no SD card

• there is less than 25GB storage capacity available

Image Added

You can switch between different views: flight mission screen and Camera views.Using the pause button will abort the mission and should only be used in emergency situations as the mission has to be repeated in this case

Abort Mission

If you need to abort the mission (e. g. for emergency situations) either click the RTH button on your controller or hold the “ABORT”-Button for 3 seconds. By click and hold the “ABORT”-Button the drone will interrupt the flight mission and hover. The “ABORT”-Button becomes a “HOME”-Button. Either fly home manually or click the “HOME”-Button to initiate RTH.

...