Please fill out the following:
use the export to word option on the right to create a editable copy of this page:
Please make sure that there are no airspace restrictions
Guidelines for Checking Drone Flight Restrictions and rontrolled / restricted Airspace (CTA)
Plant data | Fill in referring data | Data delivered (check field) |
|---|---|---|
Name | ||
Location | ||
Address | ||
GPS coordinates | ||
Altitude above sea level | ||
Other plant data | ||
Type of internet connection (preferably > 100MB>100 MB/s for efficient data upload) | ||
Any obstacles (towers, power lines, military base/airport nearby...) | ||
Solar Field |
|
|
Nominal cold/hot header HTF temperature |
|
|
HCE |
|
|
Diameter of steel tube |
|
|
Diameter of glass tube |
|
|
Cold length of HCE (@20°C) |
|
|
...
SCE Geometry | Fill in the referring data | PDF delivered |
|---|---|---|
Focal length |
|
|
Aperture width |
|
|
SCE length (mirror edges) (refer to annex, Fig. 1) |
|
|
Dimensions of individual mirrors, mirror gaps, mirror gap at vertex |
|
|
Detail of HCE support: position (refer to annex, Fig. 2) |
|
|
Detail of HCE supports: length tilting parts |
|
|
SCA Geometry (drawing needed) |
| |
Number of SCEs per SCA |
|
|
Width of drive pylon (north-south direction)  |
|
|
Width of normal pylon (north-south direction)  |
|
|
Length of fixed pipes at the drive pylon (pipe length usually depends on position relative to cold header) (refer to annex, Fig. 3 3) |
|
|
Loop Geometry |
| |
Number of SCAs per loop (normally 2 in north-south direction and 2 in east-west direction, in total 4) |
|
|
Distance between SCAs in east-west direction |
|
|
Distance between SCAs within the same loop in north-south direction |
|
|
Subfield/ block geometry |
| |
GPS coordinates of lower left drive pylon for each sub field |
|
|
Number of loops per sub field in NS direction |
|
|
Deviation of field orientation from north-south axis (most likely 0°) |
|
|
Elevation model (*) |
|
|
Heat transfer fluid flow direction (**) |
|
|
Plant coding system for all components (***) | Subfield: Loop: SCA: SCE: HCE: Mirror: |
|
Sample Data Set of Solar Field Operation Time Series (****) |
|
|
...
In order to integrate your specific nomenclature in the results and visualizations, we need the PCS code structure of your plant. For an HCE, e.g. Sub-09_Loop-06_SCA-03_HCE-05 (what you deliver is what you will see in the web app!):
Plant Coding System | Data delivered |
|---|---|
Subfield | |
Loop | |
SCA | |
SCE | |
HCE | |
Mirror |
Sample Data Set of Solar Field Operation Time Series (for detailed explanation see Technical Scope 3.2)
...